Hi Roland, On Thu, Jul 7, 2011 at 7:44 PM, roland DROUAL <[email protected]> wrote: > I'm a beginner with Junos. > I'm trying to do a Virtual Chassis with two EX4200-24F. > All seem right. > In cli mode, I can see the interfaces from the master, but I can't see the > interfaces from the backup switch, starting from ge-1/0/0 until ge-1/0/24 . > Is somebody can help me ? [...]
Your interfaces are almost certainly there; they're just not configured yet. It's a bit confusing -- by default, the interfaces from the first switch only in the VC appear in the configuration explicitly. On SFP-based interfaces, JUNOS only creates the interface upon insertion of a transceiver. If you run 'show interfaces terse' you should see ge-1/0/0 through ge-1/0/23 **as long as those ports have SFPs inserted **. Just go ahead and apply configuration to them. JUNOS isn't like IOS in the way that physical interfaces are always visible in the configuration. I usually do a 'wildcard delete ge-*' on a new switch, then set up interface-range statements or apply configuration only to interfaces that need it. Cheers, Dale PS: you've got a ge-0/0/24 in your configuration which doesn't actually exist. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
