Hi,
I'm hoping someone can help me with a routing configuration issue. I
have the following physical configuration:
Backbone Router
/ \
VLAN 416| | VLAN 417
L2 Switch
|| VLAN 416 & 417
||
SRX3400 Cluster
The backbone router & the L2 switch has 2 WAN connections (VLAN 416 &
417) from 2 SPs. The VLANs are trunked over a LAG connection from the
L2 switch to the SRX3400 cluster. OSPF is being run in a stub area
between the backbone router & the SRXs. The backbone router does not
support BFD.
My problem is, if one of the 2 WAN connections between the Backbone
router & the L2 switch goes down, how do I prevent the SRX from still
sending traffic on both of the 2 VLAN connections? OSPF on the SRX
knows that the neighbor has gone down. I think I should be able to do
this via the routing table, but I'm not sure how to approach it.
Any help would be greatly appreciated.
Thanks.
-John
--
John Center
Villanova University
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
