Hi Mike, That's not strictly true either. But I assume you meant to say TCP traffic rather than IP. But even with TCP, you can use the JUNOSe tcp-friendly rate limiter if you don't want to use QoS for whatever reason.
/chris -----Original Message----- From: Miquel van Smoorenburg <[email protected]> Sender: [email protected] Date: Fri, 22 Jul 2011 17:56:01 To: Thiago Lizardo<[email protected]> Cc: [email protected]<[email protected]> Subject: Re: [j-nsp] Juniper BRAS E120 On Tue, 2011-07-05 at 15:59 -0300, Thiago Lizardo wrote: > Hi Muhammad, > > First of all you need to create "rate limits"(2Mb, 4Mb, etc). After, you need > to create policies for each bandwidth profile. Inside each "policy-list" > configuration you will put the rate limit that was created. > You probably don't want to do that. Ratelimiters are not really suited for IP traffic. You'll make your customers unhappy. You want to use shaping instead. Basically define scheduler-profiles that you then include in qos-profiles. But you want to do it generically, using qos-parameters of which you set the value through a radius attribute. But see also my other posting. Mike. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
