On Sun, Jul 31, 2011 at 4:39 PM, Jonathan Lassoff <[email protected]> wrote:
> On Sun, Jul 31, 2011 at 7:28 PM, Richard Zheng <[email protected]> wrote: > > Hi, > > > > We have a configuration with multiple VR to support multiple customers. > Vlan > > is used to trunk traffic into and out of SRX. While trying to do chassis > > clustering, it seems vlan is not supported. How do you do chassis cluster > > with multiple customers? Do you have dedicated interfaces for each > customer? > > If it's truly just a trunk and used to carry traffic to another switch > for access, there is another way to configure a trunk that doesn't > require "ethernet-switching". > > Configure an interface like: > > interfaces { > ge-0/0/0 { > vlan-tagging; > unit 10 { > vlan-id 10; > family inet { > address 10.0.0.1/24; > } > } > } > > Now, your IP interface could be ge-0/0/0.10 instead of vlan.10. > > Cheers, > jof > Thanks jof. I see, in production we can make other switches handle the access and only use srx for firewall. So after setting up reth interface, we should be able to add vlan-tagging to it, right? _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
