Dear All I have a setup where I need to load balancing routes received from 2 RR in IPV4 environment (not VPN-IPV4)
I have my PE (let's called PE1) connected to 2 RR (cluster), my destination subnet eg: 10.1.1.1/24 is behind 2 PE (PE-2 and PE3) which are also client of the same 2RR PE-2 and PE3 are sending the same route 10.1.1.1/24 to the RR , which as per normal behavior is selecting the best route to PE1 , My issue is that RR is always advertising the route 10.1.1.1/24 through PE2 (due to lower router id) as best path and I would like to load balanced it through PE2 and PE3 Anyone can recommend a way to load balance ? Unfortunately I dont have a lab to test any solution and there are live traffic on this ,so all I can do is guessing is whether the below 2 option would work or not. 2 option I have 1.So here I am trying to thinking about testing the multipath command under the RR configuration to see if I am receiving routes from both PE or not , 2. try to put all devices them in routing instance VRF , with the BGP configuration under it (both RR and client) , and RD configured in the VRF (but not putting any vpn family under bgp) so that it stays IPV4 routes , maybe I could cheat the RR to believe these are 2 differentes routes due to the RD, but dont know if this works or not . anyone has had similar issue and found a workaround ? does the 2 option above actually work or not ? thanks for any input _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
