Another thing to check is the source address you're pinging from. Often it helps to use the command
ping source <source ip> <destination ip you're trying to ping> Otherwise you might find the source IP the Juniper's pinging from isn't necessarily the interface you expect it to be. Tim On Sun, August 28, 2011 5:19 am, Keegan Holley wrote: > where are you pinging from? inside the vlan or outside of it? Check for > mac-addresses. If you are learning the devices mac addresses on both > ports > in the correct vlans it's not the switch or the config. Have you tried > another device in the same port or swapping the two devices? Can you post > the config as well? _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
