Hello, I have tried for the last 3 years to push all vendors to implement something like this: http://tools.ietf.org/html/draft-raszuk-bgp-optimal-route-reflection-00 But they never find a Bussiness Case to deploy it.
It good be great to have a smart route reflector that sends the best NH to each remote PE, depending of the IGP and metric of the remote PE, so the RR will give NextHop 1 to the router A since it knows the IGP topology and know what router A would choose (assuming IGP as the factor to break the even between NHs) and the same RR will send Next Hop 2 to the router B since (again) knows the best NH for router B since RR knows the IGP topology. To make this smart super RR it is necessary for the RR to calculate Dijstra as if the RR were the remote router and use this calculation to choose the best NH for this remote router. You will have just one or two super RR and more idle routers since they will just have one full-routing table with the best NH. Regards. Ignacio 2011/9/6 Mark Tinka <[email protected]> > On Tuesday, September 06, 2011 09:51:43 PM P.Narayana Swamy > wrote: > > > It seems "add-path" feature comes with hidden cli :) > > Typically, this would mean it's not a supported feature :-). > > Cheers, > > Mark. > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
