Dear All
Is there is a possibility in Juniper MX-960 to configure the same
Physical Port to support L2 Bridging ie Trunk Link and also configure
same time for L3 Routing ie Sub-interfaces.
It would look something like this as listed below
{master}[edit]
root@Junos# set interfaces ae1 unit 0 family ethernet-switching port-mode trunk
root@JUnos# set interfaces ae1 unit 0 family ethernet-switching vlan
members [ 71-73 573 ]
root@JUnos#set interfaces ae1 unit 79 vlan-id 79 family inet address 1.1.1.1/30
--
Regards
Varma
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
