> I only want it for my demo MX80
Me too ;-)
Am 27.09.2011 22:44, schrieb Cooper Lees:
Hi all,
I ran into this issue. The MX80 is a PowerPC routing engine and the
jweb is only compiled for Intel CPUs ...
I hope in 11.3/4 it will be recompiled and will work. I only want it
for my demo MX80 ...
Cooper
Sent from Cooper's iPhone 4 ... Please excuse typos :-)
On 28/09/2011, at 6:34 AM, "Alex D."<[email protected]> wrote:
I didn't know that jweb isn't supported on MX80 with JUNOS< 11.3/11.4.
I will try it with one of these releases eventually in our test lab.
Thanks for your help.
Regards,
Alex
Am 27.09.2011 21:39, schrieb Kevin Shymkiw:
What if you try 11.3 or 11.4? I know it wasn't supported in the MX80 until
an 11.x release.
Kevin
On Tue, Sep 27, 2011 at 2:48 PM, Alex D.<[email protected]> wrote:
Hello,
i have a Juniper MX80 running JUNOS 10.4R6.5. I installed the domestic
version jinstall-ppc-10.4R6.5-**domestic-signed.tgz with ssh daemon. Now i
tried to install package jweb-10.4R6.5-signed.tgz, but while validation i
got the following error:
Web management gatekeeper process: mgd: unable to execute
/usr/sbin/httpd-gk: Bad file descriptor
mgd: error: configuration check-out failed
Is someone here who knows this problem and can give me a hint how to fix
it?
Thanks in advance...
Regards,
alex
______________________________**_________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/**mailman/listinfo/juniper-nsp<https://puck.nether.net/mailman/listinfo/juniper-nsp>
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
