On 9/27/11 18:58 , Jonathan Lassoff wrote: > On Tue, Sep 27, 2011 at 6:20 AM, Chris Gapske <[email protected]> > wrote: >> Sorry Very new at this but I would like to ask for help on an issue. >> >> I am getting conflicting stories on the ability of the SRX. TAC says they >> cannot get Mobile Devices such as Android or Idevices to connect with the >> pulse client. >> However I have heard reports of people getting there Android devices to work >> can anybody confirm this ? >> >> Thank you .. I am pretty new at the SRX thank you. > > Apparently it is possible to do on some SRX platforms. I've only had > success in terminating mobile clients against the "Secure Access" > (SA-series) devices running IVE/SSL VPN software. > > I found this KB article on doing it. It utilizes the "Dynamic VPN" > feature. http://kb.juniper.net/InfoCenter/index?page=content&id=KB17641 > > Beware the Android client though -- as of several months ago, it only > provided a wrapped web browser, rather than real IP tunneling. The iOS > Pulse client does proper tunneling though.
2.1 which has been around for a while does support ip tunneling but only on devices where the end user has root access, which either means you have developer phones or they've been hacked. > Good luck. > > Cheers, > jof > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
