Hi All I have a requirement in my typical LAN scenario whereby my LAN server connects in a dual homed fashion to two different LAN switches from a third party vendor. We are using vrrp for the server LAN. The two 3rd party vendor switches are uplinked via L3 links to two ex-4500. We are tracking the uplink interfaces under vrrp such that no traffic blackholing occurs if the uplink connectivity from master is broken. Now customer has asked to use bfd support in the vrrp uplink interface tracking which is supported by the vendor switches. This topic is confusing to me as what configuration would be required on ex-4500 to achieve this as the requirement is not to configure bfd for routing protocol but for vrrp interface tracking. As per my understanding we have no option in junos to configure vrrp independently under interfaces other than using it under routing context. If anyone has any prior experience with implementing such setup please guide me on what needs to be done from ex-4500 side to achieve this. We are using static routes on ex-4500 for server LAN reachability and default route on vendor switches towards junos but no bfd for static routing. Regards Varma _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
