Is this all happening within the single MX480 router? Can you differentiate between a core and a normal interface ? Is this LDP- or BGP-signalled VPLS ? Any configs you can share ?
David On 6 October 2011 10:49, Martin Levin <[email protected]> wrote: > Hi, > > At https://www.sugarsync.com/pf/D6892768_9896580_18584 you'll find a > logical map of a vpls domain connections. > > For background information: We have devices in our network that need to > be able to communicate with servers, and sometimes with other devices as > well. To limit mac-adress distribution in our network we want to be able > to run our vpls instances in no-local-switching mode. > > If we look at the picture the expected behaviour is the following. > > PC1 + PC2 should be able to communicate with everything and everything > should be able to communicate with them. > PC3 + PC4 should be able to communicate with PC1 + PC2 but not with > each other. > > Actual behaviour is: > > One core (PC1) interface (probably the first in the configuration) is > able to communicate with everything except the other core interface. > Nothing is able to communicate with the other core interface (PC2). > Normal interfaces (PC3, PC4) are able to communicate with core (PC1), > but not with each other. > > Nothing in the manual gives any indication that only ONE core-facing > interface is allowed. > > Any help to reach the expected behaviour would be greatly appreciated. > > Sincerely, > Martin > City of Molndal > > > --- > Martin Levin > IT-strategy & planning > Mölndals stad > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
