Hi there, We are experiencing an issue caused by exactly this behaviour (Control traffic from the RE being automatically marked as CoS 6), and I think the current answer regarding changing the value is no. We are currently getting around it by looping traffic back into the MX80 (using physical ports) in order to strip 802.1p off transit traffic, which is an expensive hack to say the least.
When I get some more time in the lab I'll try using lt interfaces to do the same. Cheers, Ben On 18/10/2011, at 9:40 PM, [email protected] wrote: > Hello, > Is there a possibility to set the CoS (802.1p) value of return traffic from > RE ? > I know that You can do it for, at least , DSCP using: > set class-of-service host-outbound traffic <dscp-code-point|forwarding-class) > Each time I send UDP echo probes to MX80 with different CoS values , the > router responds with the same pattern 100(binary). The best workaround in > this case would be to set CoS values according to the particular DSCP (which > is preserved in this case). > Thanks in advance for Your help! > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
