> i have check ur doc yestersday.there are two question:
> 1.how to check mx box have tunnel service card.
It probably doesn't - however, if you have a DPC or MPC you can
configure the necessary tunnel "PIC". E.g. assuming a 20 port GigE
DPC in slot 0,
chassis {
fpc 0 {
pic 0 {
tunnel-services {
bandwidth 1g;
}
}
}
}
will give you the necessary tunnels available at lt-0/0/10, gr-0/1/10,
ip-0/1/10, vt-0/1/10 etc. Yes, it is always 10.
Steinar Haug, Nethelp consulting, [email protected]
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
