hi we added in our network a new mx960, with EBGP peering on it
We receive full routing table , when I do "show route receive-protocol bgp x.x.x.x> it took around 2-3 min for the 380k to be downloaded, which is ok . But It seems that it took around 20min to be able to reach any bgp destination from that BGP full routing table I received, although when I do "show rould see the BGP routete ..."I cou . MY thinking is that it took 2-3 min for the full routing to be installed in the RIB-IN, however 20min to be process through the RIB-Loc and then the RIB-out to be installed in the PFE. I don't think it is normal for a device like a MX960 to take that long to process and install the routes in the Forwarding Engine Can anyone advise, how I can see (what commands, output, ...) how long it takes for the MX960 to process the BGP routes from the RIB-IN to Rib-LOC, and how long it takes from the RIB-LOc to the RIB-OUT ie:PFE ? _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
