On (2011-11-22 16:38 -0700), David Ball wrote: > I check the docs to see if there's a hard limit on # of communities > per 'from' statement but didn't find anything. Anyone know if there's > an undocumented hard limit (or documented, and I didn't find it) ?
Sorry no clue of such limit, but 'show bgp targets' in both cases might be interesting. Your config is just fine and it should be supported, having said that, I would not do hub+spoke this way. How I'd run hub+spoke is that I'd have 1 RT including hub routes (like 0.0.0.0/0) and 1 RT including spoke routes. Spokes import hub-rt and export spoke-rt, and bub imports spoke-rt and exports hub-rt. Now when you add spokes, you don't have to touch hub at all. Then you need to consider if there are many spokes in single PE, if you want to put them in separate routing-instance (and allocate new RD always, no new RTs though) or if you want to put all sites in single routing-instance and use 'half-duplex VRF' to ensure traffic in local PE between spokes does not go directly. Which is better for you, will depend on how typical it is to have many spokes in single PE. -- ++ytti _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
