Hello List, I've an IQ2 PIC (PE-4GE-TYPE1-SFP-IQ2) in an M7i that won't come online for some reason. Or, rather, it seems to come online, stay on for approximately 3 minutes, then resets, comes back online. It does this last four times and then stays offline until the next time I run 'request pic online ...'.
Even when the PIC is showing as online, none of the inserted SFPs are detected. I've inserted the PIC into the spare slot in an M10i, where it came online - and stayed online - without problem so I'm certain that the PIC itself is fine. My next step is obviously to try a different PIC in the M7i to see if the slot itself is shagged. Before I do that though, is there anything else I can check on the M7i? I've looked in the chassisd log and there's nothing in there that would indicate what the problem is: Nov 24 00:23:32 pic offline req, pic 2, fpc 0 Nov 24 00:23:32 CHASSISD_IFDEV_DETACH_PIC: ifdev_detach_pic(0/2) Nov 24 00:23:32 ifd ge-0/2/0 marked as gone Nov 24 00:23:32 ifd ge-0/2/1 marked as gone Nov 24 00:23:32 ifd ge-0/2/2 marked as gone Nov 24 00:23:32 ifd ge-0/2/3 marked as gone Nov 24 00:23:32 ifd pc-0/2/0 marked as gone Nov 24 00:23:32 send pic_offline_ack fpc 0 pic 2 accept 1 Nov 24 00:23:32 CHASSISD_SNMP_TRAP10: SNMP trap generated: FRU power off (jnxFruContentsIndex 8, jnxFruL1Index 1, jnxFruL2Index 3, jnxFruL3Index 0, jnxFruName PIC: 4x 1GE(LAN), IQ2 @ 0/2/*, jnxFruType 11, jnxFruSlot 0, jnxFruOfflineReason 2, jnxFruLastPowerOff 75357, jnxFruLastPowerOn 62202) Nov 24 00:23:32 PIC (fpc 0 pic 2) message operation: change. ifd count 3, flags 0x2 in mesg Nov 24 00:23:32 PIC (fpc 0 pic 2) message operation: change. ifd count 1, flags 0x2 in mesg Nov 24 00:23:32 PIC (fpc 0 pic 2) message operation: change. ifd count 0, flags 0 in mesg Nov 24 00:23:32 Time to clean up PIC FPC 0, PIC 2 Nov 24 00:23:32 PIC (fpc 0 pic 2) message operation: delete. ifd count 0, flags 0 in mesg Nov 24 00:23:32 pic_handle_message_idl: PIC fpc 0 pic 2 got deleted Nov 24 00:23:32 pic detach, pic 2, fpc 0 Nov 24 00:23:32 set_pic_offline: fpc 0 pic 2 pic_retries 0 fru_timerset 0 pic_in_issu 0 Nov 24 00:23:32 hwdb: entry for pic 673 at slot 2 in fpc 0 deleted The M7i is fully-loaded (i.e., PE-1GE-SFP in every other port); it has an RE-400-256-S (with 512MB RAM) and a built-in 1GE port. I'm probably looking at a knackered slot here but any suggestions or pointers would be appreciated. Thanks in advance, Dermot Williams _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
