On Wednesday, December 21, 2011 07:45:40 AM Jim Glen wrote: > I've done this on both the EX-4200...
I'm curious what the switch would do, in this case, if you wanted to drive some IP phone or wi-fi AP's via PoE, as DC power supplies don't normally allow the switch to drive power to anything via 802.3af. Since the switch has both an AC and DC power supply, what would it do :-)? > and the MX480 systems, > it's not recommended by Juniper but it works, I've also > mixed 110v and 208v with no problems. JimG That's when you, accidentally, plug the 208VAC source into the 110VAC power supply :-). Document, document, document. DON'T USE or DON'T CONNECT stickers all over the place, e.t.c. :-). Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
