Rafael, your memory is spot on. See an earlier post for verification: https://puck.nether.net/pipermail/juniper-nsp/2011-June/020382.html
-- Graham Brown Twitter - @mountainrescuer <https://twitter.com/#!/mountainrescuer> LinkedIn <http://www.linkedin.com/in/grahamcbrown> On Fri, Dec 23, 2011 at 9:37 PM, Rafael Rodriguez <[email protected]>wrote: > If my memory is correct, 11.x supports IPv6 with lt. > > Sent from my iPhone > > On Dec 23, 2011, at 8:14, Eric Van Tol <[email protected]> wrote: > > > Hi all, > > Is frame-relay encapsulation not supported on the MX80 logical tunnel > interfaces? I'm on 10.4R8.5 and need to configure IPv6 on an lt- interface: > > > > Interface on the default instance: > > > > # show interfaces lt-0/0/10 > > unit 1 { > > encapsulation frame-relay; > > dlci 128; > > peer-unit 1; > > family inet { > > address 192.168.209.201/30; > > } > > family inet6 { > > address 2001:db8::d1c9/64; > > } > > } > > Interface on my logical-system: > > > > # show interfaces lt-0/0/10 > > unit 1 { > > encapsulation frame-relay; > > dlci 128; > > peer-unit 0; > > family inet { > > address 192.168.209.202/30; > > } > > family inet6 { > > address 2001:db8::d1ca/64; > > } > > } > > > > Interface shows 'up' and no flags are set to indicate a problem. > However, pinging doesn't work and this shows up in my logs: > > > > Dec 23 07:57:12 r1 tfeb0 HALP-trinity_nh_ucast_installnh(690) > encaps-install failed: unsupported option > > Dec 23 07:57:12 r1 tfeb0 Failed to create platform state, unsupported > option > > Dec 23 07:57:12 r1 /kernel: RT_PFE: NH IPC op 1 (ADD NEXTHOP) failed, > err 1 (Unknown) peer_class 0, peer_index 0 peer_type 17 > > Dec 23 07:57:12 r1 /kernel: RT_PFE: NH details: idx 690 type 2 ifl 80 > > Dec 23 07:57:12 r1 tfeb0 Failed to install in platform, unsupported > option > > Dec 23 07:57:12 r1 tfeb0 Type specific Add failed unsupported option > nh-id:690 > > Dec 23 07:57:12 r1 /kernel: RT_PFE: NH IPC op 2 (CHANGE NEXTHOP) > failed, err 1 (Unknown) peer_class 0, peer_index 0 peer_type 17 > > Dec 23 07:57:12 r1 l2cp[1186]: Read acess profile () config > > Dec 23 07:57:12 r1 /kernel: RT_PFE: NH IPC op 1 (ADD NEXTHOP) failed, > err 1 (Unknown) peer_class 0, peer_index 0 peer_type 17 > > Dec 23 07:57:12 r1 /kernel: RT_PFE: NH details: idx 692 type 2 ifl 81 > > Dec 23 07:57:13 r1 tfeb0 HALP-trinity_nh_ucast_installnh(690) > encaps-install failed: unsupported option > > Dec 23 07:57:13 r1 tfeb0 Failed to create platform state, unsupported > option > > Dec 23 07:57:13 r1 tfeb0 Failed to install in platform, unsupported > option > > Dec 23 07:57:13 r1 tfeb0 Type specific Add failed unsupported option > nh-id:690 > > Dec 23 07:57:13 r1 tfeb0 Failed to instantiate new copy for NH(690) > > Dec 23 07:57:13 r1 tfeb0 Failed to change state > > Dec 23 07:57:13 r1 tfeb0 HALP-trinity_nh_ucast_installnh(692) > encaps-install failed: unsupported option > > Dec 23 07:57:14 r1 tfeb0 Failed to create platform state, unsupported > option > > Dec 23 07:57:14 r1 tfeb0 Failed to install in platform, unsupported > option > > Dec 23 07:57:14 r1 tfeb0 Type specific Add failed unsupported option > nh-id:692 > > > > Also, this all works if I remove 'family inet6' and change encapsulation > to 'ethernet'. > > > > If frame-relay encapsulation isn't supported, how does one use IPv6 on > the lt- interfaces? > > > > Thanks in advance, > > evt > > > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
