HI Mark Oh Yes what I mentioned for using LDP was without RSVP-TE at all..I was trying to run RSVP-TE without using LDP at all..
With Ivan's suggestion I was enabled to get lables for the remote PE's Loopback,,, Thanks much to You and Ivan for your support on getting hold of this issue.. I finally summarize the network setup requirement to establish MPLS VPN Traffic flow across Broken LSP as 1. Enable PE-P and P-PE RSVP TEs 2. Announce the RSVP-TEs into the IGP on PE and P routers 5. Import inet.0 routes to inet.3 using rib-group import at PE-Routers/RRs 3.Enable LDP Tunneling on the RSVP-TE at PE and P routers 4.Enable LDP on the Loopback interface at PE and P routers. Thanks much again for all your help.. [email protected]# run traceroute 10.0.6.1 traceroute to 10.0.6.1 (10.0.6.1), 30 hops max, 40 byte packets 1 10.0.10.10 (10.0.10.10) 3.943 ms 1.811 ms 2.832 ms MPLS Label=300688 CoS=0 TTL=1 S=1 2 10.0.6.1 (10.0.6.1) 11.451 ms 3.897 ms 8.285 ms [edit] [email protected]# [email protected]# run show route 10.0.6.1 extensive inet.0: 17 destinations, 22 routes (17 active, 0 holddown, 0 hidden) 10.0.6.1/32 (2 entries, 2 announced) State: <FlashAll> TSI: KRT in-kernel 10.0.6.1/32 -> {Push 300688} *LDP Preference: 9 Next hop type: Router Next-hop reference count: 3 Next hop: 10.0.10.2 via ge-0/0/0.0 weight 0x1 Label-switched-path to_core1.pop1 Label operation: Push 300608 Next hop: 10.0.10.2 via ge-0/0/0.0 weight 0x1 Label-switched-path to_core1.pop1 Label operation: Push 300608 Next hop: 10.0.10.10 via ge-0/0/1.0 weight 0x1, selected Label-switched-path to_core1.pop2 Label operation: Push 300688 Next hop: 10.0.10.10 via ge-0/0/1.0 weight 0x1 Label-switched-path to_core1.pop2 Label operation: Push 300688 State: <Active Int> Local AS: 64513 Age: 53 Metric: 1 Task: LDP Announcge-0/0/ent bits (1): 0-KRT AS path: I Secondary Tables: inet.3 OSPF Preference: 10 Next hop type: Router Next-hop reference count: 5 Next hop: 10.0.10.2 via ge-0/0/0.0 Next hop: 10.0.10.10 via ge-0/0/1.0, selected Next hop: 10.0.10.2 via ge-0/0/0.0 weight 0x1 Label-switched-path to_core1.pop1 Next hop: 10.0.10.10 via ge-0/0/1.0 weight 0x1 Label-switched-path to_core1.pop2 State: <Int> Inactive reason: Route Preference Local AS: 64513 Age: 22:46 Metric: 2 Area: 0.0.0.0 Task: OSPF Announcge-0/0/ent bits (1): 3-LDP AS path: I Secondary Tables: inet.3 inet.3: 10 destinations, 15 routes (10 active, 0 holddown, 0 hidden) 10.0.6.1/32 (2 entries, 2 announced) State: <FlashAll> *LDP Preference: 9 Next hop type: Router Next-hop reference count: 3 Next hop: 10.0.10.2 via ge-0/0/0.0 weight 0x1 Label-switched-path to_core1.pop1 Label operation: Push 300608 Next hop: 10.0.10.2 via ge-0/0/0.0 weight 0x1 Label-switched-path to_core1.pop1 Label operation: Push 300608 Next hop: 10.0.10.10 via ge-0/0/1.0 weight 0x1, selected Label-switched-path to_core1.pop2 Label operation: Push 300688 Next hop: 10.0.10.10 via ge-0/0/1.0 weight 0x1 Label-switched-path to_core1.pop2 Label operation: Push 300688 State: <Secondary Active Int> Local AS: 64513 Age: 53 Metric: 1 Task: LDP Announcge-0/0/ent bits (1): 2-Resolve tree 1 AS path: I Primary Routing Table inet.0 OSPF Preference: 10 Next hop type: Router Next-hop reference count: 5 Next hop: 10.0.10.2 via ge-0/0/0.0 Next hop: 10.0.10.10 via ge-0/0/1.0, selected Next hop: 10.0.10.2 via ge-0/0/0.0 weight 0x1 Label-switched-path to_core1.pop1 Next hop: 10.0.10.10 via ge-0/0/1.0 weight 0x1 Label-switched-path to_core1.pop2 State: <Secondary Int> Inactive reason: Route Preference Local AS: 64513 Age: 22:46 Metric: 2 Area: 0.0.0.0 Task: OSPF Announcge-0/0/ent bits (1): 1-LDP AS path: I Primary Routing Table inet.0 [edit] [email protected]# [email protected]# run show route table CE1A.inet.0 172.16.251.1 extensive CE1A.inet.0: 6 destinations, 8 routes (6 active, 0 holddown, 0 hidden) 172.16.251.1/32 (2 entries, 1 announced) TSI: KRT in-kernel 172.16.251.1/32 -> {indirect(131071)} Page 0 idx 1 Type 1 val 8f0d8a4 Nexthop: Self AS path: [64513] 64513 I Communities: target:64513:100 Path 172.16.251.1 from 10.0.2.1 Vector len 4. Val: 1 *BGP Preference: 170/-101 Route Distinguisher: 64513:1 Next hop type: Indirect Next-hop reference count: 10 Source: 10.0.2.1 Next hop type: Router, Next hop index: 131075 Next hop: 10.0.10.2 via ge-0/0/0.0 weight 0x1 Label operation: Push 16, Push 300608(top) Next hop: 10.0.10.2 via ge-0/0/0.0 weight 0x1, selected Label operation: Push 16, Push 300608(top) Next hop: 10.0.10.10 via ge-0/0/1.0 weight 0x1 Label operation: Push 16, Push 300688(top) Next hop: 10.0.10.10 via ge-0/0/1.0 weight 0x1 Label operation: Push 16, Push 300688(top) Protocol next hop: 10.0.6.1 Push 16 Indirect next hop: 8ffc000 131071 State: <Secondary Active Int Ext> Local AS: 64513 Peer AS: 64513 Age: 28 Metric: 0 Metric2: 1 Task: BGP_64513.10.0.2.1+63485 Announcge-0/0/ent bits (2): 0-KRT 1-BGP RT Background AS path: 64514 I (Originator) Cluster list: 10.0.2.1 AS path: Originator ID: 10.0.6.1 Communities: target:64513:100 Import Accepted VPN Label: 16 Localpref: 100 Router ID: 10.0.2.1 Primary Routing Table bgp.l3vpn.0 Indirect next hops: 1 Protocol next hop: 10.0.6.1 Metric: 1 Push 16 Indirect next hop: 8ffc000 131071 Indirect path forwarding next hops: 4 Next hop type: Router Next hop: 10.0.10.2 via ge-0/0/0.0 weight 0x1 Next hop: 10.0.10.2 via ge-0/0/0.0 weight 0x1 Next hop: 10.0.10.10 via ge-0/0/1.0 weight 0x1 Next hop: 10.0.10.10 via ge-0/0/1.0 weight 0x1 10.0.6.1/32 Originating RIB: inet.3 Metric: 1 Node path count: 1 Forwarding nexthops: 4 Nexthop: 10.0.10.2 via ge-0/0/0.0 Nexthop: 10.0.10.2 via ge-0/0/0.0 Nexthop: 10.0.10.10 via ge-0/0/1.0 Nexthop: 10.0.10.10 via ge-0/0/1.0 BGP Preference: 170/-101 Route Distinguisher: 64513:1 Next hop type: Indirect Next-hop reference count: 10 Source: 10.0.5.1 Next hop type: Router, Next hop index: 131075 Next hop: 10.0.10.2 via ge-0/0/0.0 weight 0x1 Label operation: Push 16, Push 300608(top) Next hop: 10.0.10.2 via ge-0/0/0.0 weight 0x1, selected Label operation: Push 16, Push 300608(top) Next hop: 10.0.10.10 via ge-0/0/1.0 weight 0x1 Label operation: Push 16, Push 300688(top) Next hop: 10.0.10.10 via ge-0/0/1.0 weight 0x1 Label operation: Push 16, Push 300688(top) Protocol next hop: 10.0.6.1 Push 16 Indirect next hop: 8ffc000 131071 State: <Secondary NotBest Int Ext> Inactive reason: Not Best in its group - Update source Local AS: 64513 Peer AS: 64513 Age: 28 Metric: 0 Metric2: 1 Task: BGP_64513.10.0.5.1+56350 AS path: 64514 I (Originator) Cluster list: 10.0.5.1 AS path: Originator ID: 10.0.6.1 Communities: target:64513:100 Import Accepted VPN Label: 16 Localpref: 100 Router ID: 10.0.5.1 Primary Routing Table bgp.l3vpn.0 Indirect next hops: 1 Protocol next hop: 10.0.6.1 Metric: 1 Push 16 Indirect next hop: 8ffc000 131071 Indirect path forwarding next hops: 4 Next hop type: Router Next hop: 10.0.10.2 via ge-0/0/0.0 weight 0x1 Next hop: 10.0.10.2 via ge-0/0/0.0 weight 0x1 Next hop: 10.0.10.10 via ge-0/0/1.0 weight 0x1 Next hop: 10.0.10.10 via ge-0/0/1.0 weight 0x1 10.0.6.1/32 Originating RIB: inet.3 Metric: 1 Node path count: 1 Forwarding nexthops: 4 Nexthop: 10.0.10.2 via ge-0/0/0.0 Nexthop: 10.0.10.2 via ge-0/0/0.0 Nexthop: 10.0.10.10 via ge-0/0/1.0 Nexthop: 10.0.10.10 via ge-0/0/1.0 [edit] [email protected]# On Mon, Dec 26, 2011 at 5:49 PM, Mark Tinka <[email protected]> wrote: > On Monday, December 26, 2011 03:24:21 PM vaibhava varma > wrote: > >> Thanks for the help so far..I tried to use >> "ldp-tunneling" under RSVP TEs from PE-P to P-PE but it >> does not works as I do not have LDP enabled anywhere to >> tunnel it via RSVP.. > > That's interesting, because I recall you mentioned that you > have LDP enabled everywhere and that is already working; > that you only needed RSVP for MPLS-FRR and MPLS-TE. > > Mark. -- Regards Vaibhava Varma _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
