> > On the 1G MICs there is extra capacity to handle an lt interface, so
> > you can configure under chassis, assuming a 20x1G MIC in MIC slot 0:
> >
> > fpc 1 {
> > pic 1 {
> > tunnel-services {
> > bandwidth 1g;
> > }
> > }
> > }
> >
>
> I understood that as MIC has enough capacity so I can also use all 20x1G
> ports on MIC simultaneously with tunneling ?
Yes.
> Can I also use all 1G ports on the MIC if I will change bandwidth to 10g ?
No. If you need 10G lt capacity you'll also need a 10G MIC, *and* for
the 10G lt interface one of the physical 10G ports will no longer be
usable.
Steinar Haug, Nethelp consulting, [email protected]
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
