Hello. I could be wrong, but I think that on M-series router you can't configure DHCP server. In datasheets is only information about DHCP relay option.
2012/2/3 Joe Shen <[email protected]> > > hi, > > don't know too much about M series, in E320 configuration should like: > > ip dhcp-local unique-client-ids > ip dhcp-local pool wlanpool > network 10.10.0.0 255.255.128.0 > dns-server 10.101.17.6 10.101.17.47 > default-router 10.10.0.1 > lease 0 0 20 > ! > ip dhcp-local excluded-address 10.10.0.1 > > > To our experience , Juniper BAS CPU load grow with DHCP subscribers, esp. > when number of concurrent online subscriber is over 10k, CPU load may > nearly 100%. > > > > > --- 12年2月3日，周五, GIULIANO (WZTECH) <[email protected]> 写道： > > > 发件人: GIULIANO (WZTECH) <[email protected]> > > 主题: [j-nsp] M-Series DHCP Server > > 收件人: [email protected] > > 日期: 2012年2月3日,周五,上午9:15 > > Hi, > > > > We are trying to configure JUNIPER M-Series with > > dhcp-local-server without any good results. > > > > Basically we are configuring: set system services > > dhcp-local-server and set access address-assignment > > > > It is not working and the router is dropping the DHCP > > Requests ... > > > > Does anyone has some experience with this ? How can I > > make it work ? > > > > Thanks a lot, > > > > Giuliano > > > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
