Thank you Mark/Stacy. i will try this with the recent release. Will share results soon.
BR/Ahsan On Tue, Feb 21, 2012 at 10:42 AM, Stacy W. Smith <[email protected]> wrote: > I can't find documentation to back up my memory, but I vaguely remember > that J-series wasn't officially supported when RSVP TE P2MP PMSI support > was added to 8.5. I would begin by trying a more recent JUNOS release on > the J6350. > > --Stacy > > On Feb 20, 2012, at 10:23 PM, Ahsan Khan wrote: > > > Yes, you are right. > > > > > > BR/Ahsan > > > > On Tue, Feb 21, 2012 at 10:01 AM, Mark Tinka <[email protected] > >wrote: > > > >> On Monday, February 13, 2012 07:54:24 PM Ahsan Khan wrote: > >> > >>> Problem occurs when CE1 (Connected with J6350) source > >>> starts sending multicast traffic but CE2 (Connected with > >>> M7i) receiver doesnot receive it > >> > >> So if I understand you correctly, when the M7i is the Sender > >> PE router (and the J6350 is the Receiver PE router), all is > >> fine. > >> > >> But when the J6350 is the Sender PE router (and the M7i is > >> now the Receiver PE router), things don't work even though > >> the control plane (and data plane signaling, i.e., p2mp > >> RSVP-TE) looks good. > >> > >> Is that about right? > >> > >> Mark. > >> > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
