That is certainly the way it is for the 3200 and 4200 http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/task/configuration/uplink-module-ex3200-ex4200-sfp-plus-mode-setting-cli.html
However it seems the 3300 is a different beast, or at least that's what I hope! From the datasheet on http://www.juniper.net/us/en/products-services/switching/ex-series/ex3300/#literature " Uplink • Fixed 4-port uplinks which can be individually configured as GbE (SFP) or 10GbE (SFP+) ports. " I've yet to find documentation detailing exactly how you go about that though. On Monday 27 February 2012 14:25:12 Nick Kritsky wrote: > As far as I remember you have to explicitly select 10g or 1g mode on PIC > level for EX uplink module. This automatically rules out any mixed mode > setup. > > NK > > 2012/2/21 Timh Bergström <[email protected]> > > > On Tue, Feb 21, 2012 at 12:03 PM, Mike Williams > > > > <[email protected]> wrote: > > > On Tuesday 21 February 2012 08:33:53 Jeff Wheeler wrote: > > > > > > The built in uplink ports in the EX3300. Do they support running 2 at > > > > 10Gb > > > > > (for VC) and 2 at 1Gb for regular ethernet? > > > I'm sure I've seen it written that all four ports can be used at 10Gb, > > > > if true > > > > > that would support my belief mixed mode operation is supported too. > > > > Afaik two of the four 10Gb ports are pre-configured for VC, the other > > two can be used for ethernet out of the box, or you can use one for VC > > and three for ethernet or the other way round, no problems (at least > > that's what the juniper SE told me when I bought mine). -- Mike Williams Senior Infrastructure Architect Comodo CA Ltd Office Tel Europe: +44 (0) 161 8747070 Fax Europe: +44 (0) 161 8771767 _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
