- 10.2R4.8 on J2320's 512M RAM; but in packet-mode (as I'm using it for an MPLS/CPE endpoint), which is the last version you can use without upgrading the CF/RAM. - 10.4R8.5 on J2320's 1Gb RAM, packet mode (same as above as MPLS CPE/endpoint) - I've had good luck with 10.4R8.5 so far though; but again, no sessions/flows. - 10.0R2.10 or 10.0R3.10 on J2320's w/1Gb RAM in Security/Flow mode, but no IPv6
Sorry couldn't be of any more help here. Haven't had a reason to run IPv6+Security yet; as we generally aren't using these J's for their fire-walling capabilities (MPLS CPE instead); or if we do (for a customer), it's for IPv4 only so far. - Chris. On 2012-02-29, at 10:23 AM, Yucong Sun (叶雨飞) wrote: > any one? > > On Fri, Feb 24, 2012 at 5:43 PM, Yucong Sun (叶雨飞) <[email protected]> wrote: >> Hi, >> >> I have two j2350, one with 9.3r4.4, and the other I am trying to find >> a good version to upgrade to, with security features. So far I have >> tried: >> >> 1) 10.1 - 10.2R4, those runs okay, but they only have half-ass ipv6 support. >> 2) 10.4R8, crash once a month or so, msut be manually rebooted, plus >> they basically just hose horribly under 20kpps or 200k sessions. >> 3) 11.X crash on boot directly >> >> they both are taking full BGP feeds, and I've upgraded them both to >> 2.5G ram, and I even upgraded on-board cpu to 3G model. >> >> anyway I'm about to give up on any hope to use non-packet mode on >> these routers, my money would have been much better spend if I just >> buy a decent dell server and good network cards, they all handles tons >> of tons more sessions just fine, any similar experiences? > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
