Yes.. LDP on interfaces..
run show route table inet.3
inet.3: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
X.X.X.X/32 *[LDP/9] 00:45:39, metric 1 (X.X.X.X = Loopback of remote
router)
> to Y.Y.Y.Y via vlan.22 (Y.Y.Y.Y = ethernet address
of remote router towards local router)
On 2/03/12 3:47 PM, "[email protected]" <[email protected]> wrote:
> LDP should be enough, as long as you have it enabled on your loopbacks
>too. What does a 'sh route table inet.3' look like? You'll need
>something in there with a valid next hop to the egress PE.
>
>David
>
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
