Hi, I recently bought a MX5-T (Instead of the MX80-5G) and I'm running 10.4R8.5 on my other MX80s and would naturally like to run the same codebase on all my MX-series hardware. However when I try to install the 10.4R8.5 release on the MX5-T it says that the platform is not supported, I thought the MX5/10/40 was the same hardware as the MX80 (it surely looks the same, side-by-side)?
Does anyone have any thoughts or information on this? It got delivered with 11.4R1.14 and I actually have no use of imix/etc whatever the new features is in the 11.X, I just want to run them as network edges with eBGP, iBGP and OSPF, no special stuff, and I'm happy with 10.4R8.5 so far. I also tried (for fun) to downgrade to 11.2R5.4 (which is the recommended release according to JTAC) but that didn't work either, the mgd process core-dumped and the validation failed, I did not run with "no-validate" (yet) for neither of the softwares. Thanks, -- Timh Bergström Head of System Operations Videoplaza/System Operations [email protected] +46 727 406 845 S:t Eriksgatan 46 Stockholm www.videoplaza.com skype: timh_bergstrom gtalk: [email protected] linkedin: _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
