Thanks David. I went back and checked. ummm. had the VLAN maps on the opposite side (geesh!)
Appreciate the second set of eyes.. ;) Paul From: David Ball [mailto:[email protected]] Sent: April-03-12 10:45 AM To: Paul Stewart Cc: [email protected] Subject: Re: [j-nsp] l2vpn tagged PE port to untagged PE port Simply applying an 'input-vlan-map pop' and 'output-vlan-map push' on the trunked port (ge-1/3/9) didn't do the job ? I used to have to do that all the time and don't recall encountering problems. The routing-instance encapsulation will need to be 'ethernet' on both sides once you do that. David On 3 April 2012 09:23, Paul Stewart <[email protected]> wrote: Hi folks. Have built an l2vpn session but ran into an issue. One side of the session is handed off on a trunked port: [edit interfaces ge-1/3/9] flexible-vlan-tagging; speed 100m; encapsulation flexible-ethernet-services; } unit 444 { description "OTA Testing"; encapsulation vlan-ccc; vlan-id 444; } The routing instance looks like this: [edit routing-instances OTA-Testing] instance-type l2vpn; interface ge-1/3/9.444; route-distinguisher xx.xx.xxx.71:444; vrf-target target:11666:9444; protocols { l2vpn { encapsulation-type ethernet-vlan; interface ge-1/3/9.444; site dis1.millbrook1 { site-identifier 71; interface ge-1/3/9.444 { remote-site-id 59; } } } } The other end though has an untagged port (straight Ethernet). I cannot figure out how to hand this off and keep getting an encapsulation mismatch on the l2vpn session? {master}[edit interfaces ge-2/1/3] speed 100m; link-mode full-duplex; encapsulation ethernet-ccc; unit 0; Routing instance: {master}[edit routing-instances OTA_Testing] instance-type l2vpn; interface ge-2/1/3.0; route-distinguisher xx.xx.xxx.xx:444; vrf-target target:11666:9444; protocols { l2vpn { encapsulation-type ethernet; interface ge-2/1/3.0; site core1.toronto1 { site-identifier 59; interface ge-2/1/3.0 { remote-site-id 71; } } } } I contacted JTAC and they suggested a VLAN map to pop and push. this didn't work . I previously had this labbed up and can't find my notes ;) Layer-2 VPN connections: Instance: OTA_Testing Local site: core1.toronto1 (59) connection-site Type St Time last up # Up trans 71 rmt EM Any thoughts on how I can fix this? Appreciate it, Paul _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
