Tom, Phil just did that.... nice too.
*Skeeve Stevens, CEO* eintellego Pty Ltd [email protected] ; www.eintellego.net <http://www.eintellego.net.au> Phone: 1300 753 383 ; Fax: (+612) 8572 9954 Cell +61 (0)414 753 383 ; skype://skeeve facebook.com/eintellego twitter.com/networkceoau ; www.linkedin.com/in/skeeve PO Box 7726, Baulkham Hills, NSW 1755 Australia The Experts Who The Experts Call Juniper - Cisco – Brocade - IBM On Wed, Apr 4, 2012 at 04:18, Tom Storey <[email protected]> wrote: > On 3 April 2012 15:41, Julien Goodwin <[email protected]> wrote: > > If you can be strict about it you can say anything but up/up and > > down/down are problems. > > What about SONET/SDH interfaces that display down/up? > > The interface can be admin down, but if its still receiving a > SONET/SDH signal from the other side then line proto will be up - > nothing necessarily wrong with that. :-) > > In reply to Skeeves original email, is there any reason you couldn't > script something like this? At least give a device a once over and > produce a summary report of "problems for this device" after which the > tech can then target only devices that have issues that need > attention. Otherwise you find yourself wasting time looking at a bunch > of boxes that dont need to be looked at when you could be doing > something more productive. > > Or better yet, syslog and SNMP traps collectors and some scripts that > produce a dashboard highlighting any issues detected. :-) > > Scripts, scripts, scripts everywhere. :-) > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
