not need to zone . coz i set it to packet mode ------------------ Best Regards, Bruno
------------------ Original ------------------ From: "ashish verma"<[email protected]>; Date: Mon, Apr 9, 2012 05:09 PM To: "bruno"<[email protected]>; Cc: "juniper-nsp"<[email protected]>; Subject: Re: [j-nsp] Layer 2 feature on srx Are you missing zones/policies since it is SRX? On Mon, Apr 9, 2012 at 7:05 PM, bruno <[email protected]> wrote: hello expert, i use two srx210h to test some Layer 2 networking features on MX Series routers. the topo is very simple PC1---SRX1----SRX2----PC2. the link in srx1---srx2 is set to trunk mode. PC1 and PC2 is belong to vlan 100. PC1 can't ping PC2. interfaces { ge-0/0/1 { description TO-SRX2; vlan-tagging; unit 0 { family bridge { interface-mode trunk; vlan-id-list [ 100 200 ]; } } } fe-0/0/4 { unit 0 { family bridge { interface-mode access; vlan-id 100; } } } irb { unit 100 { description "GW For VLAN 100"; family inet { address 100.1.1.254/24; } } unit 200 { description "GW For VLAN 200"; family inet { address 200.1.1.254/24; } } } } security { forwarding-options { family { mpls { mode packet-based; } } } } bridge-domains { vlan_100 { vlan-id 100; routing-interface irb.100; } vlan_200 { vlan-id 200; routing-interface irb.200; } } ------------------ Best Regards, Bruno _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
