You need to first check whether your traffic is matching against the policy, secondly you need to check phase-2 negotiations once traffic is matched against policy. Traceoptions on J-series will help you identify the problem and share configuration of both sides for better understanding.
regards; Asad 2012/4/18 osamh hammoudeh <[email protected]> > > its policy based , no proxy-id > > BR > osama > > ------------------------------ > Date: Wed, 18 Apr 2012 15:25:32 +0500 > Subject: Re: [j-nsp] VPN configuration | Juniper J router and cisco router > From: [email protected] > To: [email protected] > CC: [email protected] > > > Hi, > > you might not be specifying the exact source that is allowed in the > proxy-ID. Also, confirm if it is policy based or tunnel based configuration > at J-end. > > regards, > > Asad > > On Wed, Apr 18, 2012 at 12:19 PM, osamh hammoudeh <[email protected]>wrote: > > > hi all , > > i had configured vpn site to site with J router and cisco router 1800 . > > problem : the tunnel did not go up till i do ping from cisco router , > if it do ping from the J router the tunnel did not go up. > > i check all the parameter . > > BR > osama > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
