Hi, You can do it using the 'L2Circuit' feature on Juniper, after enabling MPLS & LDP protocols on the PE-facing interface on each of the MX routers.
This should help: http://www.juniper.net/techpubs/software/junos/junos95/feature-guide/id-11637858.html Regards, Saba Sumsam On Thu, Apr 19, 2012 at 12:13 AM, Kevin Wormington <[email protected]> wrote: > Hi, > > I'm wanting to transport a layer2 VLAN via MPLS between two MX80s (Trio > based) and on PE1 the customer traffic is coming into the PE interface as > tagged traffic some of which are terminated directly to layer3 as units on > the MX80s interface. PE2 the traffic will be untagged toward the customer. > MPLS is not configured at all now on PE1/PE2...does anyone have any > example configs for the simplest config possible to accomplish this? > > JunOS is 10.4R9.2 on both units. > > Thanks, > > Kevin > ______________________________**_________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/**mailman/listinfo/juniper-nsp<https://puck.nether.net/mailman/listinfo/juniper-nsp> > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
