Hi folks,
Anyone can help if I'm missing anything?
I have a BGP session setup between two ME3600X (IOS 15.2) PEs with JUNOS
10.4R4.5 M120 RR exchanging L2VPN VPLS auto-discovery AFI.
The session is well established and prefixes are received however the peers are
unable to locate each other hence the VPLS circuit is not created.
Peering the two Cisco PEs together resulting a working VPLS connectivity.
Ditto when peering the PEs with and ASR1K/9K acting as an interim RR.
Here's the BGP neighbour output on the M120.
ihsan@rr-01-csfcb-re0> show configuration protocols bgp group es-rr-clients
family l2vpn
auto-discovery-only;
ihsan@rr-01-csfcb-re0> show bgp neighbor 223.28.0.15
Peer: 223.28.0.15+54196 AS 9930 Local: 223.28.0.242+179 AS 9930
Description: iBGP Session
Type: Internal State: Established (route reflector client)Flags: <Sync>
Last State: OpenConfirm Last Event: RecvKeepAlive
Last Error: Hold Timer Expired Error
Export: [ BGP-OUTBOUND-POLICY-ACCESS ]
Options: <Preference LocalAddress AuthKey GracefulRestart LogUpDown Cluster
AddressFamily PeerAS Rib-group Refresh>
Authentication key is configured
Address families configured: inet-unicast inet-vpn-unicast inet6-vpn-unicast
l2vpn-auto-discovery-only
Local Address: 223.28.0.242 Holdtime: 90 Preference: 170
Number of flaps: 4
Last flap event: Restart
Error: 'Hold Timer Expired Error' Sent: 2 Recv: 0
Peer ID: 223.28.0.15 Local ID: 223.28.0.242 Active Holdtime: 90
Keepalive Interval: 30 Peer index: 45
BFD: disabled, down
NLRI for restart configured on peer: inet-unicast inet-vpn-unicast l2vpn
inet6-vpn-unicast
NLRI advertised by peer: inet-unicast inet-vpn-unicast l2vpn
NLRI for this session: inet-unicast inet-vpn-unicast l2vpn
Peer supports Refresh capability (2)
Restart time configured on the peer: 120
Stale routes from peer are kept for: 300
Restart time requested by this peer: 120
NLRI that peer supports restart for: inet-unicast inet-vpn-unicast l2vpn
NLRI that restart is negotiated for: inet-unicast inet-vpn-unicast l2vpn
NLRI of received end-of-rib markers: inet-unicast inet-vpn-unicast l2vpn
NLRI of all end-of-rib markers sent: inet-unicast inet-vpn-unicast l2vpn
Peer supports 4 byte AS extension (peer-as 9930)
Peer does not support Addpath
Table inet.0 Bit: 10000
RIB State: BGP restart is complete
Send state: in sync
Active prefixes: 2
Received prefixes: 2
Accepted prefixes: 2
Suppressed due to damping: 0
Advertised prefixes: 2847
Table bgp.l3vpn.0 Bit: 20000
RIB State: BGP restart is complete
RIB State: VPN restart is complete
Send state: in sync
Active prefixes: 1
Received prefixes: 1
Accepted prefixes: 1
Suppressed due to damping: 0
Advertised prefixes: 8938
Table bgp.l2vpn.0 Bit: 60001
RIB State: BGP restart is complete
RIB State: VPN restart is complete
Send state: in sync
Active prefixes: 1
Received prefixes: 1
Accepted prefixes: 1
Suppressed due to damping: 0
Advertised prefixes: 0
Last traffic (seconds): Received 21 Sent 1 Checked 17
Input messages: Total 29 Updates 9 Refreshes 1 Octets 948
Output messages: Total 888 Updates 869 Refreshes 0 Octets 233138
Output Queue[0]: 0
Output Queue[1]: 0
Output Queue[5]: 0
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
