Hi - Thanks. I was looking for inet-precedence under firewall filter so it's just a precedence :)
> From: [email protected] > To: [email protected]; [email protected] > Date: Sat, 26 May 2012 20:13:22 -0700 > Subject: Re: [j-nsp] mapping inet-precedence to a particular queue > > {master}[edit] > jnpr@R1-RE0# set firewall family inet filter test term 1 from precedence ? > Possible completions: > <range> Range of values > [ Open a set of values > critical-ecp Critical/ECP > flash Flash > flash-override Flash override > immediate Immediate > internet-control Internet control > net-control Network control > priority Priority > routine Routine > > > Thank you, > > -- > Doug Hanks - JNCIE-ENT #213, JNCIE-SP #875 > Sr. Systems Engineer > Juniper Networks > > On 5/26/12 7:30 PM, "Uzi Be" <[email protected]> wrote: > > > > >Hi, > >I have a customer who is sending traffic with inet-precedence marking and > >we want to assign it to appropriates queues according to their marking. > >Can someone points me to the firewall filter option that can be used to > >identify packet based on the inet-precedence bits and then put that in to > >the relevant queue. > >like > >ingress packet marked inet-precedence from customer: 001 --> match > >that --> put that into af queue. > >By using firewall filter I want to catch the above packets and then put > >them into af queue. > >ThanksAndrew > >_______________________________________________ > >juniper-nsp mailing list [email protected] > >https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
