Hi all, I've got two old M7i's, both equipped with the 1x G/E, 1000 BASE FIC. There is one difference though - the version (1.4 & 1.6).
xxx@xxx# run show chassis pic fpc-slot 1 pic-slot 3 FPC slot 1, PIC slot 3 information: Type 1x G/E, 1000 BASE ASIC type QGE FPGA State Online PIC version 1.6 xxx@xxx# run show chassis pic fpc-slot 1 pic-slot 3 FPC slot 1, PIC slot 3 information: Type 1x G/E, 1000 BASE ASIC type QGE FPGA State Online PIC version 1.4 I have non-Juniper SFPs which seem to work with 1.6 but not with 1.4. I am trying to procure a Juniper SFP so I can test again but I was wondering if any of you knew what the deference is between the two especially when it comes to features. I've also seen version 1.9 and 1.10. Thank you! Regards, Vladislav A. VASILEV _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
