Hi Ivan I finally got the routes on the VRF-Lite CE by using two commands on the PE
domain-id disable domain-vpn-tag 0 I have a dual homed setup with two PE and 2 VRF-Lite CE. Will this not cause routing loop because the CEs will share the route and will send the routes back to other PE which will have an MP-iBGP route with preference 170 and OSPF route with preference 10/150. Regards Varma On Fri, Jul 13, 2012 at 4:16 PM, Ivan Ivanov <[email protected]> wrote: > Hi, > > Yes, this could be the case. > > domain-vpn-tag 0 > > This will delete the DN bit option in Junos. (This works only on Type 5 and > Type 7 LSAs) > > HTH, > Ivan, > > On Fri, Jul 13, 2012 at 1:29 PM, Arun Kumar <[email protected]> wrote: >> >> Hi, >> >> If its a VRF lite CE with OSPF running, then the same loop prevention >> mechanism is applied i.e. if Downbit or Domain tag is set, then VRF lite CE >> do not accept it. In case of Cisco as CE, there is a command to disable this >> "capability vrf-lite". But with Juniper as CE, I am not aware but if there >> is a CLI to disable this Down bit check that should do. >> >> thanks, >> Arun >> >> > -- Regards Vaibhava Varma _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
