On Fri, Jul 20, 2012 at 3:31 PM, Michel de Nostredame <[email protected]> wrote: > Good day, > > I am recently working on an replacement of aged M10i; we are using > M10i to terminate multiple 100mbps/1gbps Metro-Ethernet from branch > buildings (FEs are aggregated on EX4200 and Layer2 uplink to M10i by > GE), hence MX80 become reasonable replacement as it has higher port > density, cheaper; able to host FE and GE SFP at the same time. > > We still have only one DS3 link on the old M10i that makes buying the > 8-port DS3 card (MIC-3D-8DS3-E3) for MX80 not economical. I found > RAD.com has an optic seems a good solution for our situation. > > This MiRICi-E3/T3 converts DS3 cable into GE SFP interface, and looks > like able to work with GE switch according to the information on > RAD.com web site. > > Does anyone have experience on MiRICi-E3/T3 and can share information > of it? Also how is the interoperability between MiRICi-E3/T3 and MX80 > (MIC-3D-20GE-SFP card)? > > > Thanks, > -- > Michel~
Just feedback to the list. I got several offline emails on this. According to those experiences MiRICi-E3/T3 is working fine with J-series and MX80. One mentioned the negotiation better to be "auto". One mentioned he is working with RAD.com at project initiation phase for MX80 + MiRICi-E3/T3. He said MiRICi-E3/T3 encapsulates Ethernet packets into T3 frames and need to install MiRICi-E3/T3 on both side instead of MiRICi-E3/T3 onside + native T3 card other side. Thanks, -- Michel~ _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
