Many thanks to you all, Now is working after adding "VLAN tagging" in main interface.
Regards, Abdullah On Fri, Jul 27, 2012 at 4:07 PM, Per Westerlund <[email protected]> wrote: > Didn't you just forget to add VLAN tagging to the main interface? > > /Per Westerlund > > 27 jul 2012 kl. 14:17 skrev Abdul 2012: > > > Hello, > > > > > > > > I have two logical systems configured on m7i router, I want to connect > > both LSs through two physical interfaces on the same router (fe-0/0/0 > > and fe0/1/0): My configs on both interfaces like: > > > > > > > > R1) > > > > > > > > root@JNCIE-SP# run show configuration logical-systems R1 > > interfaces { > > fe-0/0/0 { > > unit 1 { > > vlan-id 111; > > family inet { > > address 10.0.5.1/24; > > } > > } > > } > > > > } > > > > > > > > P1) > > > > > > > > root@JNCIE-SP# run show configuration logical-systems P1 > > interfaces { > > fe-0/1/0 { > > unit 1 { > > vlan-id 111; > > family inet { > > address 10.0.5.254/24; > > } > > } > > } > > > > } > > > > > > > > > > > > However, when I ping from R1 to P1 I got the following message "ping: > > sendto: Can't assign requested address" > > > > > > > > What's the reason for that? > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
