Hello,
Using the following linecards at this moment, Power enough and all PEM's online
and ok.
Do you have a repair agent in the Benelux region?
James
Item FRU model number
Midplane CHAS-BP-MX480-S
FPM Board CRAFT-MX480-S
PEM 0 PWR-MX480-2520-AC-S
PEM 1 PWR-MX480-2520-AC-S
PEM 2 PWR-MX480-2520-AC-S
PEM 3 PWR-MX480-2520-AC-S
Routing Engine RE-S-1800X4-8G-S
Routing Engine RE-S-1800X4-8G-S
CB 0 SCBE-MX-S
CB 1 SCBE-MX-S
FPC 1 MPC-3D-16XGE-SFPP
FPC 2 MPC-3D-16XGE-SFPP
FPC 3 MPC-3D-16XGE-SFPP
FPC 4 MPC-3D-16XGE-SFPP
FPC 5 MPC-3D-16XGE-SFPP
Fan Tray FFANTRAY-MX480-HC-S
System:
Zone 0:
Capacity: 4100 W (maximum 4100 W)
Allocated power: 2680 W (1420 W remaining)
Actual usage: 1995 W
Total system capacity: 4100 W (maximum 4100 W)
Total remaining power: 1420 W
-----Original Message-----
From: James Jones [mailto:[email protected]]
Sent: woensdag, 01 augustus, 2012 02:17
To: James Higgins
Cc: [email protected]; [email protected]
Subject: Re: [c-nsp] Repair Junipe MPC 3D 16x 10GE linecard
What other line cards do you have in the box? Do you have enough power.
Sent from my iPhone
On Jul 31, 2012, at 6:34 PM, James Higgins <[email protected]> wrote:
> Hello,
>
> I have a Juniper blade that is broken; does any body have a Benelux contact
> that can fix it?
>
> Junipe MPC 3D 16x 10GE linecard
>
> linecard logs:
> Jul 30 16:41:20 playground_re0 chassisd[1423]: CHASSISD_SNMP_TRAP10:
> SNMP trap generated: FRU power on (jnxFruContentsIndex 7,
> jnxFruL1Index 5, jnxFruL2Index 0, jnxFruL3Index 0, jnxFruName FPC: MPC
> 3D 16x 10GE @ 4/*/*, jnxFruType 3, jnxFruSlot 4, jnxFruOfflineReason
> 2, jnxFruLastPowerOff 0, jnxFruLastPowerOn 115581764) Jul 30 16:41:30
> playground_re0 chassisd[1423]: CHASSISD_POWER_CHECK: FPC 4 not
> powering up Jul 30 16:41:30 playground_re0 chassisd[1423]:
> CHASSISD_SNMP_TRAP10: SNMP trap generated: Fru Offline
> (jnxFruContentsIndex 7, jnxFruL1Index 5, jnxFruL2Index 0,
> jnxFruL3Index 0, jnxFruName FPC: MPC 3D 16x 10GE @ 4/*/*, jnxFruType
> 3, jnxFruSlot 4, jnxFruOfflineReason 3, jnxFruLastPowerOff 0,
> jnxFruLastPowerOn 115581764) Jul 30 16:41:30 playground_re0
> chassisd[1423]: CHASSISD_SNMP_TRAP7: SNMP trap generated: Fru Failed
> (jnxFruContentsIndex 7, jnxFruL1Index 5, jnxFruL2Index 0,
> jnxFruL3Index 0, jnxFruName FPC: MPC 3D 16x 10GE @ 4/*/*, jnxFruType
> 3, jnxFruSlot 4)
>
>
> Chassis series: MX480/960
>
> kind regards,
>
> James Higgins
> Network Engineer Leaseweb B.V.
> www.leaseweb.com<http://www.leaseweb.com/>
>
> _______________________________________________
> cisco-nsp mailing list [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
