> You don't happen to run 10.2R2 where I know there is a bug preventing the BUM > messages to be sent between vpls nodes.
Thanks for the response Daniel. I'm running this - it is possibly slightly older than the "10.2R2" that you mention..: --------------------------------------- Hostname: MX240 Model: mx240 JUNOS Base OS boot [10.2R1.8] JUNOS Base OS Software Suite [10.2R1.8] JUNOS Kernel Software Suite [10.2R1.8] JUNOS Crypto Software Suite [10.2R1.8] JUNOS Packet Forwarding Engine Support (M/T Common) [10.2R1.8] JUNOS Packet Forwarding Engine Support (MX Common) [10.2R1.8] JUNOS Online Documentation [10.2R1.8] JUNOS Voice Services Container package [10.2R1.8] JUNOS Border Gateway Function package [10.2R1.8] JUNOS Services AACL Container package [10.2R1.8] JUNOS Services LL-PDF Container package [10.2R1.8] JUNOS Services PTSP Container package [10.2R1.8] JUNOS Services Stateful Firewall [10.2R1.8] JUNOS Services NAT [10.2R1.8] JUNOS Services Application Level Gateways [10.2R1.8] JUNOS AppId Services [10.2R1.8] JUNOS IDP Services [10.2R1.8] JUNOS Routing Software Suite [10.2R1.8] --------------------------------------- On Thu, Aug 9, 2012 at 6:28 PM, Daniel Hilj <[email protected]> wrote: > You don't happen to run 10.2R2 where I know there is a bug preventing the BUM > messages to be sent between vpls nodes. > > Best Regards > Daniel Hilj > > > 9 aug 2012 kl. 14:38 skrev "Stefan Fouant" <[email protected]>: > >> Stupid question, but you do have DUT13 configured for the static LSP as well >> correct? >> >> Sent from my HTC on the Now Network from Sprint! >> >> ----- Reply message ----- >> From: "Bala Subrahmanyam Venkata" <[email protected]> >> Date: Thu, Aug 9, 2012 5:31 am >> Subject: [j-nsp] Sending vpls broadcast packets over static LSP >> To: <[email protected]> >> >> Hello- >> >> I'm trying to configure this (Static Point-to-Multipoint Flooding LSP >> for vpls): >> http://www.juniper.net/techpubs/software/junos/junos95/swconfig-vpns/id-11510467.html#id-11512557 >> >> I have the static LSP up but the broadcast packets don't seem to go >> over it. Any specific reason ? I've pasted what I think as >> configs/show output needed. One thing I've done is that the static LSP >> is just a plain static LSP (i.e. there is no multiple endpoints for >> it...) Let me know if more is required...Thanks in advance. >> >> ------------------------------------------------ >> >> Topology: >> >> MX240-----------------DUT13----------------DUT11 >> >> (where MX240 & DUT11 have the VPLS endpoints) >> >> >> >> bala@MX240# show routing-instances slsp-vpls >> instance-type vpls; >> interface ge-1/1/9.0; >> provider-tunnel { >> rsvp-te { >> static-lsp slsp3; >> } >> } >> protocols { >> vpls { >> no-tunnel-services; >> vpls-id 2047; >> neighbor 11.11.11.11; >> connectivity-type ce; >> } >> } >> >> [edit] >> bala@MX240# >> >> bala@MX240# show protocols mpls static-label-switched-path slsp3 >> ingress { >> next-hop 9.1.7.13; >> to 31.31.31.11; >> push 2046; >> } >> >> >> bala@MX240# run show vpls connections instance slsp-vpls >> ..... >> Instance: slsp-vpls >> VPLS-id: 2047 >> Neighbor Type St Time last up # Up trans >> 11.11.11.11(vpls-id 2047) rmt OL >> >> >> >> bala@MX240# run show mpls static-lsp name slsp3 extensive >> Ingress LSPs: >> LSPname: slsp3, To: 31.31.31.11 >> State: Up >> Nexthop: 9.1.7.13 Via ge-1/0/6.0 >> LabelOperation: Push, Outgoing-label: 2046 >> Created: Thu Aug 2 09:48:01 2012 >> Bandwidth: 0 bps >> Statistics: Packets 0, Bytes 0 >> Total 2, displayed 1, Up 1, Down 0 >> >> Transit LSPs: >> Total 1, displayed 0, Up 0, Down 0 >> >> Bypass LSPs: >> Total 0, displayed 0, Up 0, Down 0 >> >> [edit] >> bala@MX240# >> >> bala@MX240# run show vpls statistics instance slsp-vpls >> VPLS statistics: >> >> Instance: slsp-vpls >> Local interface: ge-1/1/9.0, Index: 87 >> Broadcast packets: 769916 >> Broadcast bytes : 197098496 >> Multicast packets: 0 >> Multicast bytes : 0 >> Flooded packets : 0 >> Flooded bytes : 0 >> Unicast packets : 0 >> Unicast bytes : 0 >> Current MAC count: 0 (Limit 1024) >> >> [edit] >> bala@MX240# >> >> >> [edit] >> bala@MX240# >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> >> -- This e-mail has been checked for virus by IPnett's Security solution -- >> > -- This e-mail has been checked for virus by IPnett's Security solution -- > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
