Use an LT to crones-connect the bridge-domain with the vlan access interfaces (which you do a push-vlan-tag on ingress), and stitch the LT into the VPLS instance.
I was going to say "sure, put the access ports into a VPLS and do a vlan-push on ingress; and a pop on egress" but yes, that raises an issue as it would pop ANY packet returning from the MPLS-universe trying to leave the VPLS (and not just the one with the specific vlan tag); so you'd end up with "leakage" from the cloud. - CK. On 10/08/2012, at 7:50 PM, William Jackson <[email protected]> wrote: > Hello > > I want to setup an MX with multiple access ports in VLAN, I then want to > bridge that vlan into a VPLS instance. > > So all L2, no interface vlan.XX stuff, is this possible? > > thanks > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
