Hi all , I am trying to configure SNMP V3 on EX switch , but i am not getting that to work , please check below
[root@nms1 ~]# snmpwalk -v3 -u MSSK -l AuthPriv -a md5 -A password -X password -m ALL 10.11.107.250 Timeout: No Response from 10.11.107.250 set snmp v3 usm local-engine user MSSK authentication-md5 authentication-password password set snmp v3 usm local-engine user MSSK privacy-des privacy-password password set snmp v3 vacm access group GRP default-context-prefix security-model usm security-level authentication read-view interfaces set snmp view ALL oid .1 set snmp view interfaces oid 1.3.6.1.4.1.2636.3.4 include The switch has no restrictions and already version 2 was like a charm BR, Mohammad On Fri, Aug 17, 2012 at 2:04 AM, Mohammad Khalil <[email protected]> wrote: > hehe the issue is i asked a question and did not receive replies :) > > > On Thu, Aug 16, 2012 at 3:35 PM, Stefan Fouant < > [email protected]> wrote: > >> No... :-b >> >> Sent from my HTC on the Now Network from Sprint! >> >> >> ----- Reply message ----- >> From: "Mohammad Khalil" <[email protected]> >> Date: Thu, Aug 16, 2012 4:23 am >> Subject: [j-nsp] test >> To: <[email protected]> >> >> anyone getting my messages? >> >> On Thu, Aug 16, 2012 at 1:02 AM, Mohammad Khalil <[email protected]> >> wrote: >> >> > Test >> > >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> >> >> > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
