Yes, you can enable it for family mpls as well ... you need family mpls
label-1, label-2 and payload ip under hash keys ...

https://www.juniper.net/techpubs/en_US/junos10.0/information-products/topic-collections/nog-mpls-frr/mpls-load-balancing-hash-key.html


Remember, hash-keys are only affected on outgoing direction and works on
per node basis. So you need to configure same hashing in all the nodes of
network for effective load balancing ...

Regards,

On Wed, Aug 29, 2012 at 12:55 PM, Mohammad Khalil <[email protected]>wrote:

> I have small question , should i implement this on family mpls as well ?
>
> Router# show interfaces ae1
> flexible-vlan-tagging;
> mtu 1600;
> encapsulation flexible-ethernet-services;
> aggregated-ether-options {
>     lacp {
>         active;
>     }
> }
> unit 0 {
>     family bridge {
>         interface-mode trunk;
>         vlan-id-list [ 14 114 204 104 214 ];
>     }
> }
> unit 10 {
>     vlan-id 10;
>     family inet {
>         address 10.0.0.17/30;
>     }
>     family iso;
>     family mpls;
> }
>
> And this should be done on both sides ?
> BR,
> Mohammad
>
>
> On Wed, Aug 29, 2012 at 10:11 AM, apurva modh <[email protected]>wrote:
>
>> Hi,
>>
>> You will not require symmetrical hashing. Just configure,
>>
>> set forwarding-options hash-key family inet layer-3
>> set forwarding-options hash-key family inet layer-4
>>
>> Regards,
>>
>>
>> On Wed, Aug 29, 2012 at 12:33 PM, Mohammad Khalil <[email protected]>wrote:
>>
>>> Hi , Thanks all for the replies
>>> Regarding the version
>>> Router# run show version
>>> Hostname: Router
>>> Model: mx240
>>> JUNOS Base OS boot [10.0R3.10]
>>> JUNOS Base OS Software Suite [10.0R3.10]
>>> JUNOS Kernel Software Suite [10.0R3.10]
>>> JUNOS Crypto Software Suite [10.0R3.10]
>>> JUNOS Packet Forwarding Engine Support (M/T Common) [10.0R3.10]
>>> JUNOS Packet Forwarding Engine Support (MX Common) [10.0R3.10]
>>> JUNOS Online Documentation [10.0R3.10]
>>> JUNOS Voice Services Container package [10.0R3.10]
>>> JUNOS Border Gateway Function package [10.0R3.10]
>>> JUNOS Services AACL Container package [10.0R3.10]
>>> JUNOS Services LL-PDF Container package [10.0R3.10]
>>> JUNOS Services Stateful Firewall [10.0R3.10]
>>> JUNOS AppId Services [10.0R3.10]
>>> JUNOS IDP Services [10.0R3.10]
>>> JUNOS Routing Software Suite [10.0R3.10]
>>>
>>> Should i configure something like the below?
>>> set forwarding-options hash-key family inet symmetric-hash
>>>
>>> How does the router know which ae group will apply to ?
>>> In my case its ae0 and ae1
>>>
>>> Thanks in advance for the great help
>>>
>>> BR,
>>> Mohammad
>>>
>>>
>>> On Tue, Aug 28, 2012 at 4:02 PM, Stefan Fouant <
>>> [email protected]> wrote:
>>>
>>> > Also, you need to send a sizable number of flows to effect a proper
>>> > distribution. A handful of flows is just not going to cut it, based on
>>> the
>>> > below mentioned hash.
>>> >
>>> > Stefan Fouant
>>> > JNCIE-SEC, JNCIE-SP, JNCIE-ENT, JNCI
>>> > Technical Trainer, Juniper Networks
>>> >
>>> > Follow us on Twitter @JuniperEducate
>>> >
>>> > Sent from my iPad
>>> >
>>> > On Aug 28, 2012, at 3:32 AM, Julien Goodwin <[email protected]
>>> >
>>> > wrote:
>>> >
>>> > > On 28/08/12 17:20, Mohammad Khalil wrote:
>>> > >> I am trying to make load balancing on the links as I checked the
>>> traffic
>>> > >> and its not balanced
>>> > >> Any ideas will be highly appreciated
>>> > >
>>> > > Depending on what traffic you're sending it may not be evenly
>>> hashable
>>> > > across the links.
>>> > >
>>> > > Depending on which side is uneven you might find help in:
>>> > >
>>> > > EX:
>>> > >
>>> >
>>> http://kb.juniper.net/InfoCenter/index?page=content&id=KB22943&smlogin=true
>>> > >
>>> > > MX:
>>> > >
>>> >
>>> http://www.juniper.net/techpubs/en_US/junos10.3/topics/concept/layer-2-services-load-balancing-and-link-aggregation.html
>>> > >
>>> > > --
>>> > > Julien Goodwin
>>> > > Studio442
>>> > > "Blue Sky Solutioneering"
>>> > >
>>> > > _______________________________________________
>>> > > juniper-nsp mailing list [email protected]
>>> > > https://puck.nether.net/mailman/listinfo/juniper-nsp
>>> >
>>> _______________________________________________
>>> juniper-nsp mailing list [email protected]
>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>>
>>
>>
>
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to