> > I need to transport VLAN (switch / bridge) from port xe-0/0/1 (unit > > 200) to port xe-0/0/2 (unit 200) on MX80. > > It it possible ? If yes can anyone paste configuration for this task. > > Can I enable QinQ for this VLAN also ? > > > > BTW. I'm running 10.4S10 > > You can try doing a simple circuit-cross-connect since there are only > two local ports involved. I /think/ QinQ should transparently pass > through this--just make sure your MTU is large enough.
Yup, it absolutely passes through. Nice and transparent. We like circuit-cross-connect :-) Steinar Haug, Nethelp consulting, [email protected] _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
