On 9/3/12 06:48 , [email protected] wrote: >>>> 1) Did someone have a chance to configure a subnet with 4 Mixed routers M7i >>>> and M10i and VRRP enabled between all of them ? >>> >>> VRRP runs between *two* routers. Aside from that, no specific problems >>> with M7i vs M10i (and why should there be? M7i and M10i are hardware >>> and software wise very much alike). >> >> VRRP can run on more than two routers just fine. All but one router >> on any LAN will become a backup. > > Thanks for the correction. A followup question: Under what circumstances > would you want to configure VRRP on more than two routers on the same > LAN segment? We've always used just two...
if you have 4 routers... rtr0 vrrp-priority 101 rtr1 vrrp-priority 99 rtr2 vrrp-priority 97 rtr3 vrrp-priority 95 does exactly what you think it would. In practice I've done this when shifting traffic beween two pairs (a new and old pair) of routers. > Steinar Haug, Nethelp consulting, [email protected] > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
