Unfortunately, as far as I know, there's no "ethernet-switching" or "bridging" capability on the high-end SRX that I know of, even though the branch can do "ethernet-switching."
-bn 0216331C On Wed, Sep 12, 2012 at 1:14 AM, Dale Shaw <[email protected]> wrote: > Hi all, > > I'm trying to find a way to use an srx3400 as an intermediate box to > provide L2 connectivity between a couple of EX switches and a J2320. > This is just a short-term arrangement to get me out of a bind. If I > can't do it, it's not a big deal, I'll dig up a 3rd switch. > > Essentially I want to use the srx3400 as a basic switch, so that the > two EX switches' uplinks and the J's LAN-facing port are in the same > broadcast domain. I want to use three ge- interfaces to accomplish the > task. > > [SRX]--[J2320] > / \ > / \ > | | > [EX1] [EX2] > > > The obvious feature seems to be bridge-domains (as > "ethernet-switching" isn't supported on SRX-HE) but it doesn't look > like I can run it if the SRX is in 'route mode'. > > I'm running JUNOS 10.0R4 on the SRX. > > Clues? > > cheers, > Dale > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
