Hi all. I upgraded my SRX100 to 12.1 (specifically R2.9) about a month and a half ago. On Sunday I went to look at my mrtg graphs and noticed that for about the past 5 weeks or so no traffic has been recorded.
I looked into my mrtg config to make sure it was ok (Im using interface name instead of ifIndex to reference my interfaces), and tried a couple of snmpwalk's from the CLI, and all seems ok, and I can return data. Then I noticed something odd. Although the interface counters have values, indicating they must have been counting at some stage, the values are basically stuck in time. Running successive snmpget's for one particular interface just returns the same values over and over, despite the fact it is carrying data for the snmp query. I tried to restart the snmp daemon, but no change. So I rebooted the device and it started working again. Now, exactly 3 days later, it has stopped again. Has anyone else experienced this and know of a fix besides reboot or perhaps a downgrade? Theres nothing in particular that I need from this release, but it would still be annoying. Thanks, Tom _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
