Hi, Just curious if anybody knew of a way to create a full mesh on SRX clusters that don't support layer 2 RSTP, ie SRX3400 cluster?
At present, a reth1 group we use hosts gateways for different environments, and there is a 10gig port on node 0 and a 10gig port on node 1. Considering we have mesh links everywhere else, and have two core switches downstream from the SRX cluster, this is a bit of a bottle neck and makes it so we have Node 0 to switch a, node 1 to switch b with no mesh. It would be really nice if say for reth0, it would prefer xe-2/0/0, then xe-2/0/1 before switching to node 1, which would also have xe-14/0/0 and xe-14/0/1. I coud then have 0/0 go to switch a and 0/1 go to switch b. I don't know if this is posible, not sure as I haven't seen any config examples of anything remotely close. All I've seen is two reth groups with different subnets, which doesn't really help. If both interfaces failed of course I could see each interface to a weight of 128 so they would trip a failover, but I don't think thats the issue here :). Is it just not possible? Maybe I'm blind? Morgan _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
