Could just add a metric to the interface you don't want passing traffic? That should take into immediate effect..
Morgan On Wed, Sep 19, 2012 at 10:46 AM, Rachid DHOU <[email protected]> wrote: > Hello Experts, > > We have 4 routers : A,B,C and D. > > A and B are M7i > C and D are M10i > > A connected to C , FE ==> Link 1 > B connected to D, FE ==> Link 2 > > *OSPF and BFD* are runing in each link. but we made a high cost in link 2 > (same area). The goal is that link doesn't forwoard traffic. > > For your opinion what is the best way to switch traffic from link 1 to Link > 2. (i mean best way : the small dowtime and easy operation ) > > 1) In OSPF configuration Reduce cost on Link 2 > 2) Disable interface on Router A > > > Don't forget BFD is runing on both links. > > Thanks for all your feedbacks. > > > Kind regards, > Rachid DHOU > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
