Actually Chris, in my experience, i think you must have LDP to run LSP/CCC on ex-4200, cough.. cough...
--- On Wed, 9/26/12, Chris Kawchuk <[email protected]> wrote: From: Chris Kawchuk <[email protected]> Subject: Re: [j-nsp] Config help for basic MPLS setup To: "Phil Mayers" <[email protected]> Cc: [email protected] Date: Wednesday, September 26, 2012, 4:42 AM I've always had troubles using an EX4200 as a "P" router. The only way Ive gotten it to "kinda" work is to build an LSP with the endpoint having protocols { mpls { explicit-null; }}, so any EX4200 in the middle doesn't try to 'pop' the outer label if it happens to be the penultimate… although my memory is sketchy on this… (I *think* I got it working across an EX4200 as a "P" this way.. Your Mileage May Vary) The only MPLS thing Ive ever seen in use is to make CCC's. i.e. think of using an EX4200 device as an olds-style "ATM Edge" Device, where it turns ethernet into a PVC/RFC1483..cough.cough.. I meant an LSP/CCC. Thats about the only application I have found. LDP is a no-go as well, so L2CKT/Martini isn't possible either… - CK. On 2012-09-25, at 5:51 PM, Phil Mayers <[email protected]> wrote: > On 09/25/2012 03:16 AM, Tim Jackson wrote: >> I'm pretty sure this is the case. EX4200 will not forward anything with > 1 >> label. > > Just... wow. What is MPLS even *for* on those boxes? _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
